Sophos Access Point

Posted on  by admin
  1. Sophos Access Points
  2. Sophos Access Point Inactive
  3. Sophos Ap
My first experience with a Sophos Access Point was a painful affair, as the Access Point (an AP55) was on a subnet sitting behind a separate router and the subnet’s DHCP server wasn’t the XG Firewall.

Sophos Mobile integration ensures that users can access SGN encrypted files and access full disk recovery keys from their mobile devices. Sophos AP 15 / 15C. Sophos AP 55 / 55C. Sophos AP 100C Access PointGet secure and reliable wireless access all over the office. A wireless access point (WAP) is a networking hardware device that allows a Wi-Fi enabled device to connect to a wired network. To configure an access point from Sophos Central, you need to connect it to the internet and register it on Sophos Central using the serial number available on the package.

After way too much mucking around I finally came across the following article:
SophosHow to troubleshoot registration issues for the Sophos Access Point
The upshot was to add Option 234 to the DHCP scope, with Option 234 pointing to the IP address of the XG Firewall you want the Access Point to register with.

Sophos Access Points


Sophos Access Point Inactive

Sophos access point apx 320For completeness I also placed the Access Point onto the same subnet as the XG Firewall and it also failed to register with the XG Firewall, as the DHCP server for the subnet was a Windows server. After adding Option 234 to the DHCP scope the AP55 showed up on the XG Firewall.

Manuf (OEM/ODM):Edimax

Sophos Ap

FCC approval date: 10 December 2018
Country of manuf.: China

FCC ID:2ACTO-APX120

CPU1:Qualcomm IPQ4019
FLA1:? MiB (Brand? Model?)
RAM1:256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Nanya NT5CC128M16JR-EK)

WI1 chip1:Qualcomm IPQ4019
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1:Qualcomm IPQ4019
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: none

ETH chip1:Brand? Model?
Switch:Qualcomm Atheros Model?
LAN speed: unspecified
LAN ports: 1

Flags: Wave2, MU-MIMO, DFS (master)

802dot11 OUI: none specified

For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.


'1244-01000833-50Z_ES2' is silkscreened on the board in the FCC photos.

It is difficult to tell whether the CPU is an IPQ4019 or IPQ4018 from the FCC internal photos.

News

'The APX 120, an entry-level 2×2 model, will be introduced in late 2018 and further models are in planning for 2019.'
Retrieved from 'https://wikidevi.wi-cat.ru/index.php?title=Sophos_APX_120&oldid=364350'