- Carbon And Oxygen Polar Or Nonpolar
- Oxygen And Carbon Dioxide
- Carbon And Oxygen Bond Type
- Carbon And Oxygen
On the previous Isotope page, you learned a bit about what isotopes are, how they are obtained, and how the isotopes of certain elements are measured. Here, we’ll elaborate on how to read carbon and oxygen isotope data and how the values are often interpreted by paleoclimatologists.
Reading Isotope Data
Carbon-Oxygen Cycle. Carbon and oxygen are independent of each other, but are very closely connected as well as interdependent on each other. The following article will cover information that will help you understand the carbon-oxygen cycle in detail. MyGuru is a learning portal that is developed in accordance with the syllabus requirements of students from Year 1 to Form 5.Visit our website and subscribe.
Measurements of carbon and oxygen isotope values of a sample obtained using a mass spectrometer are compared to a sample of known isotopic values, called a reference standard. The resultant isotopic signature of a sample is expressed using a delta (δ) followed by the isotope number and the symbol of the element being measured. Oxygen isotope measurements are read as δ18O, or delta oxygen eighteen, and carbon is read as δ13C, or delta carbon thirteen. These values are expressed as per mil (‰). The definitions of δ13C and δ18O are as follows:
Thus, delta values of carbon and oxygen can be either positive or negative.
Interpreting Carbon and Oxygen Isotopes
Because both carbon and oxygen isotopes are measured simultaneously from one sample, the data are usually interpreted together. Oxygen and carbon isotope data from samples that are plotted, either against age or depth, are called ‘curves’ by scientists. There are several factors that influence carbon and oxygen curves, but below, we will focus on carbon and isotope curves obtained from planktic and benthic foraminifera, and a few of the ways these curves can be interpreted. Carbon isotopes are a bit more complex, so we have only included a few of the ways they can be interpreted. As a reminder, planktic foraminifera live near the surface of the ocean (in the mixed layer or the upper thermocline), and benthic foraminifera live at the ocean bottom, with some species living within the sediment on the seafloor.
Evaporation and precipitation are two factors that most influence the ratio of heavy (oxygen 18; O18) to light (O16) oxygen in the oceans. When seawater evaporates, O16 is preferentially uptaken because it is lighter, while the heavier O18 is left behind. When water vapor condenses, the heavier oxygen leaves first, as precipitation, before the lighter oxygen.
During different times in Earth’s history, the oceans had more O18 relative to O16. We’ll briefly discuss how these oxygen isotope values are interpreted by paleoclimatologists.
Increased Oxygen 18 Values
Water evaporated from the ocean surface is enriched in O16 (it has a lighter or more negative δ18O signal). When this water precipitates out as snow at the poles, it becomes trapped on land, compacting over time to create ice. When Earth is cool enough year-round that ice caps are permanent, the ice on Earth’s surface is enriched in O16 relative to O18. This happens as more and more of the lighter O16 is locked up in ice (the water has a more positive δ18O signal). During colder times in Earth’s history, the oxygen isotope value extracted from the shells (tests) of benthic and planktic foraminifera shells have heavier, or more positive, δ18O values. The foraminifera will preferentially create their tests out of the lighter O16 unless it is not available and during these cold intervals, O18 is more abundant. Warmer intervals are indicated by lighter, or more negative, δ18O values.
Decreased Oxygen 18 Values
When the Earth begins to warm, ice caps begin to melt back, and if the Earth warms further, there are hardly any permanent ice sheets at the poles. When this happens, the O16-enriched ice returns to the ocean as water. A huge influx of water enriched with O16 creates ocean waters that then become diluted with respect to O18. On the chart on the right, warmer times are indicated by more negative (or ‘lighter’) O18 values (more negative δ18O), indicating a reduction in the amount of ice on the Earth.
The above scenario applies to the global oxygen values of the oceans. Isotopic values of oxygen can also be measured from different regions and compared for the same time in Earth’s history. Regionally negative δ18O signals (more O16) can indicate that an area experienced increased rainfall.
Because the ocean bottom water is more homogeneous, or well-mixed, compared to the surface ocean water, benthic foraminifera record ‘global’ isotope values. The figure at the right show the δ18O values from benthic foraminifera for the last 10 million years. Because we are geoscientists, we read time from the oldest to the youngest, just like you read English from the left to right. Thus, to interpret what is happening through time, begin at the bottom of the curve and ‘read’ up, towards younger dates. Notice at the bottom of the curve, values are in the red color with more negative values. This indicates that at this time in Earth’s history, the Miocene, the bottom ocean temperature was much warmer, and there was much less ice at the poles. As you move up the curve, the values fluctuate quite a bit, but notice how the curve, in general, trends to the right in the blue area. This means the values are becoming more positive, which indicates that there are more O18 molecules in the water, which is interpreted to mean the Earth was cooling down during this time, and there was more ice at the poles.
Carbon And Oxygen Polar Or Nonpolar
Oxygen curves from planktic foraminifera record a more local signal than benthic foraminifera. This is because the surface ocean is very dynamic (it’s always changing) compared to the deep ocean. In addition, it is not as homogeneous (well-mixed) as the bottom of the water column. Curves from planktic foraminifera can be interpreted the same as benthic foraminifera in general, but the effects of evaporation and precipitation can also affect the isotope signal. Evaporation causes a decrease of O16 ions and thus an increase of O18 in the water column, which causes the curve to move towards more positive δ18O values. Precipitation increases the amount of O16 ions in the water column, which causes the curve to move towards more negative δ18O values.
Carbon isotopes obtained from the shells of marine organisms are strongly influenced by photosynthesis, respiration, and upwelling of ocean waters, the process by which older, more C12-rich waters are brought from the bottom ocean to the surface. Therefore, when a planktic foraminifera builds its shell in an upwelling area, the δ13C signal will be more negative. There are two main isotopes of carbon that we are concerned with in this website: carbon 13 (C13) and carbon 12 (C12). Just like oxygen isotopes, the carbon isotope with more neutrons (C13) is heavier, whereas C12 is lighter.
Throughout Earth’s history, the amount of C12 and C13 in the atmosphere and in the oceans has changed, which makes working with carbon isotopes a bit trickier than oxygen. Thus, we’ll just briefly discuss some of the ways carbon curves can be interpreted without bogging you down with too many technical terms and background information (although if you are interested in learning more about this, please contact us!).
Increased Carbon 13 Values
Increased, or heavier, δ13C values, generally indicate increased productivity in the ocean. Photosynthesizing organisms, such as algae and plankton, preferentially uptake C12 during photosynthesis, which leaves more C13 in the water column with which marine organisms build their shells. When there is a lot of photosynthesis happening in the water column geoscientists refer to this as a time of increased productivity. When there are times of increased productivity (lots of things growing and photosynthesizing in the water column), this usually means there is increased burial of carbon, or sediment accumulation on the seafloor (because there’s lots of things pooping and dying and falling down to the seafloor).
An increase in δ13C values can also indicate that erosion from land (the terrestrial realm) is decreased. Soil tends to have a more negative δ13C value because it contains remains of dead plants (that are generally made of C12 ions). When this soil washes into the ocean, it puts more C12 in the waters.
Decreased Carbon 13 Values
Alternatively, when there is very little photosynthesis occurring in the water column, there are more C12 molecules in solution, and thus more are incorporated into the shells of marine organisms. This can also correlate with times of decreased burial, because there are not as many organisms living in the water column (less poop and fewer dead organisms falling to the seafloor).
δ13C values can also become more negative due to increased erosion from land into the ocean (see above paragraph). CO2 from volcanoes tends to also be very enriched in C12, so times in Earth’s history that are characterized by intense volcanism can create more negative δ13C values.
Carbon curves created from benthic foraminifer shells tell geoscientists something about the bottom water conditions in the ocean. Respiration, or the decay of organic matter (remember the poop and dead organisms we talked about earlier?) tends to release more C12 into the bottom waters. As water masses move along the seafloor, they pick up this C12 signature, which gets incorporated into the benthic foraminifer’s shell. Thus, a benthic foraminifer’s δ13C value can tell us about the age of the bottom waters (older bottom waters that have picked up more C12= more negative δ13C values; younger bottom waters= more positive δ13C values). The δ13C curve at left is a global stack (lots of carbon curves from all over the world were plotted together) from benthic foraminifera. Again, we read the figure from the bottom (oldest) to the top (youngest). Notice that δ13C values, in general, from 10-0 million years become more negative. This signal is in part from the bottom ocean waters becoming older as the modern-day deep-water ocean circulation began (youngest waters sink in the Arctic and travel along the bottom of the water column into the Pacific Ocean).
Oxygen And Carbon Dioxide
Benthic foraminifera carbon values also tell us something about sea level through time, as related to weathering. When sea level is high, this generally leads to less weathering, or less transport of soils (which, remember, are enriched in C12), into the oceans, and thus is recorded as a more positive δ13C signal. Low sea level generally correlates to higher global erosion rates, and thus a more negative δ13C signal. On the chart at left, notice that during 10-6.5 million years ago, δ13C values are generally more positive. As you move into the modern towards 0 million years, the values are more negative. If you look back at the oxygen isotope chart, you’ll notice that these relatively negative carbon values correlate with times of cooler climate and more ice. When there is more ice, this leads to a drop in sea level. Thus, the more negative values on the carbon isotope curve are partly due to a sea level fall from increased ice sheets at the poles, which led to increased weathering.
Carbon And Oxygen Bond Type
Similar to oxygen isotopes, carbon isotopes obtained from planktic foraminifera are generally interpreted as a more local signal, as the surface layer in the ocean is not as homogeneous (well-mixed) as the bottom waters. Carbon isotope values in planktic foraminifera shells are mainly affected by photosynthesis and upwelling. When more organisms are photosynthesizing in the upper water column (increased productivity), this leads to more C13 ions available in the water for foraminifera to build their shells (because the C12 ions are being used for photosynthesis). When there is little to no photosynthesis happening in the water column, more C12 ions are available for the foraminifera to build into their shells, causing the δ13C signal to become more negative.
Carbon And Oxygen
To learn more about oxygen and carbon isotopes, visit the following sites: